Hot Water Extraction Carpet Cleaning

Dirt and soil are easily seen on a hard surface and soon wipe off, but on carpet it can soon work its way deep into the fibers where the abrasive action will cause them to deteriorate and need replacing prematurely. We use a cleaning system that deep cleans your carpets, flushing the dirt and pollutants from the fibers with self-neutralizing cleaning chemicals that are also non-toxic and bio-degradable, leaving your carpets clean and fresh again. We offer only the best cleaning methods and use only the safest, most effective products. It is worth noting that virtually every carpet manufacturer recommends that their carpets are professionally cleaned every 12/24 months and some are now making it compulsory condition of their wear warranties.

Carpet Cleaning with Hot Water Extraction or 'Steam' Cleaning

Portable or truck-mounted equipment is used to spray heated detergent solution into the carpet pile at a high pressure and immediately extracted along with the suspended soil particles. The machine may employ rotary brushes or another agitating device to work the solution into the pile and loosen soil.

Factors that affect the results of this method are:

  • Operator skills
  • High Quality Cleaning Solutions
  • Solution temperature
  • Spray pressure
  • Vacuum power
  • Pre-Treating Spots & High Traffic Areas

Carpet Cleaning with Shampoo

In this method, detergent solution is released onto the carpet through openings in a rotary brush, whose rotary action converts the solution into foam and works it into the carpet. Once dry, vacuuming removes the residue containing loose, encapsulated soil. At times, chemicals may be added to the detergent solution to reduce odors, retard soiling, brighten colors and/or speed drying.

Carpet Cleaning with a Combination of Hot Water Extraction & Shampoo

As the name implies, this method uses the Hot Water Extraction method and Shampoo. This method is especially effective for cleaning highly soiled carpets, with heavy oil/soil build-up.

The process has two steps:

  1. Shampoo using rotary brush to loosen soil
  2. Hot Water and rinsing solution to remove shampoo residue and dirt